top of page

Fence Vibration System IDS iFence™ (IDS 3602)

The IDS iFence™, new generation of Perimeter Intrusion Detection Systems (PIDS).
Provides a Complete, Cost-Effective Vibration-Based Detection Intrusion System for Installation on Gates, Walls Grids, Fences and other Perimeter Systems in conjunction with a Computerized Control Center.
IDS iFence™ is an outdoor fence mounted electronic intrusion detection system designed to detect attempted intrusions through a perimeter fence (Cilmbing over, Cutting through, Lifting off, etc.).
Each detector contains an Accelerometer element supported by microprocessor based signal processing, making it fully autonomous and fully configurable.

 

The shakers system designed to detect attempted intrusion through a perimeter fence, the vibration sensors fasten to the fence and detect vibrations caused by climbing the fence or by cutting through it.
This system is particularly easy to install, Supplied with the sensors assembled on the cables and ready for mounting.

 

The IDS iFence™ shakers has one of the highest reliability and lowest false alarm rates, and it is suitable for installation on most types of walls and on most types of fences, including chain link, welded mesh, barbed wire or razor mesh.

IDS iFence™, IDS-3602
IDS-iFence™, IDS-3602

Main Features

IDS iFence™ vibration sensors are made from a special high-resistant long-lasting plastic that requires no maintenance.
The built-in microprocessor use unique differential algorithm to filter and distinguish between real and false alarms.
The sensors and all electrical connections are hermetically, ultrasonic weld and epoxy sealed assuring absolute protection from dust, corrosion and humidity. The sealing allows the system to be completely operable even under water.

IDS-iFence™ vibration system meets strict nuclear industry specifications and has played an integral role in providing a high level of security in nuclear facilities throughout the world. The vibration system can be linked to a Perimeter Control Center (PCC) that analyzes data from the sensors while filtering out false alarms.

 

  • Outdoor electronic sensor

  • Pin point detection (Up to 3m detection resolution)

  • Independent parameters setting for each sensor

  • Unique sensor comparing shock algorithm

  • High reliability and ultra low false alarms rate

 

The IDS-iFence™ Fence Vibration System is a very cost-effective electronic intrusion detection system based on technologically enhanced sensors that can be mounted on any type of fence fabric, transforming any fence/wall/gate into an intrusion-proof barrier with minimal modifications.

 

Specifications

 

  • Temperature Range: -40°C to +70°F (-40°F to +158°F), MIL STD 810F

  • Relative Humidity: Sensors, cables and junction boxes are completely waterproof (IP67)

  • Rain, Hail, UV Radiation: Unaffected

  • Lightning and Electronic Transients: MIL STD 461

  • EMI/RFI Processor: MIL STD 461

bottom of page